Lenovo Vibe Shot - Firmware Z90a40_S363_160625_ROW. Lenovo Vibe Shot firmware Lenovo vibe shot firmware

I recently received mine Lenovo Vibe Shot Z90-7. The smartphone had original Chinese firmware. In principle, I review both Chinese and Russian versions when there are no other firmwares for the phone, or when the firmware contains at least English or Chinese. But it so happens that the Lenovo Vibe Shot Z90-7 has a large number of English items, and not only in the menu. Therefore, before reviewing the smartphone and its graphical shell, I decided to change the Chinese firmware to international one. Today we will deal with the Lenovo Vibe Shot Z90-7 firmware.

We will flash our smartphone with the official international firmware. Considering the problems of working in two networks and LTE on Android 6, we will flash it on Android 5. In addition, if you need a six, you can update to it using OTA updates.

To flash the Lenovo Vibe Shot Z90-7 firmware, we will need a software package, and . Download the archive from and unpack it. First of all, we launch vcredist_x86 in order to restore Microsoft Visual C++ 2010. The fact is that MV settings, messed up by the installation of games or programs, can prevent you from properly flashing your smartphone. After restoring the MV, start the installation QPST 2.7.422.

The most important step is to remove the SIM card and memory card from the smartphone. 100% of phones from which memory cards were not removed turned into bricks. Therefore, be sure to remove the memory card and SIM cards before flashing the firmware.

Launch Device Manager to monitor the correct connection of the Lenovo Vibe Shot Z90-7 to the computer. Most likely, your smartphone will be determined as Vibe Shot with an incorrect driver installation icon.

We need the smartphone to be identified as a port Qualcomm HS-USB QDLoader 9008. Neither a removable drive, nor a smartphone, nor a Qualcomm HS-USB QDLoader 9006. But a Qualcomm HS-USB QDLoader 9008 port. To do this, turn off the smartphone completely. After turning off the smartphone, hold down the Volume+ key (increase sound) and insert the USB cable. You will have a device like QHSUSB_BULK.

Right-click to open the context menu and select Update drivers. The automatic search will not give results, so we select - Search for drivers on this computer. In the window that appears, indicate the unpacked folder with our drivers. To the warning about the danger of installing unknown drivers, we respond - Install this driver anyway. After this, our Lenovo Vibe Shot Z90-7 will be detected as Qualcomm HS-USB QDLoader 9008 COM 10. You may have a different port. The main thing is to identify the Qualcomm HS-USB QDLoader 9008 port.



What to do if the smartphone is identified as Qualcomm HS-USB QDLoader 9006.


Let's launch QFIL. The top line of the program should indicate our device and the port on which it is located. If everything is correct, we continue.



In field Programmer path press Browse and select the path to the unzipped folder with the firmware, or rather, to the file prog_emmc_firehose_89XX.mbn. Then click Load XML… and select, in the same folder, first rawprogram0.xml, and then patch0.xml. In principle, you can’t go wrong, because when selected, the program will not see files except rawprogram0.xml, and after loading it, it will not see files except patch0.xml. Click Download.

The Lenovo Vibe Shot Z90-7 firmware update to international firmware has begun. This can also be seen on the smartphone screen.

After flashing the firmware, the first thing you need to do is change the region code. To do this, in the dialer you need to dial ####682# . In the window that appears, select RU. Please note that after changing the region code, all data from your device will be deleted. And installing programs for your region may take a long time. My parameters were used for about 20-25 minutes. After changing the region, it is advisable to reset the settings in order to clean up all the tails.

This completes the firmware for Lenovo Vibe Shot Z90-7 for international firmware.

Problems encountered when flashing Lenovo Vibe Shot Z90-7 firmware and ways to solve them:


Buy Lenovo Vibe Shot Z90-7.

Lenovo Vibe Shot runs an operating system Android 5.0. Its performance is rated 5 out of 5 (in its segment). This smartphone is high-performance. Here are the characteristics of the device, instructions on how to reset the settings, flash the device and, of course, how to get root rights to Lenovo

Root Lenovo Vibe Shot

How to get root for Lenovo Vibe Shot see instructions below.

Below are universal programs for obtaining root rights for devices on Qualcomm Snapdragon

  • (need PC)
  • (Root using PC)
  • (popular)
  • (root in one click)

If you could not obtain superuser (root) rights or the program did not appear (you can install it yourself) - ask a question in the topic. You may need to flash a custom kernel.

Characteristics

  1. Battery capacity: 2900 mAh
  2. Features: separate button for camera
  3. Type: smartphone
  4. Weight: 145 g
  5. Control: touch buttons
  6. Operating system: Android 5.0
  7. Case type: classic
  8. Number of SIM cards: 2
  9. Dimensions (WxHxT): 70x142x7.3 mm
  10. Screen type: color IPS, touch
  11. Touch screen type: multi-touch, capacitive
  12. Diagonal: 5 inch.
  13. Image size: 1920x1080
  14. Automatic screen rotation: yes
  15. Camera: 16 million pixels, built-in flash
  16. Camera functions: autofocus
  17. Video recording: yes
  18. Front camera: yes, 8 million pixels.
  19. Audio: MP3, FM radio
  20. Headphone Jack: 3.5mm
  21. Interfaces: Wi-Fi 802.11n, Bluetooth 4.1, USB
  22. Standard: GSM 900/1800/1900, 3G, 4G LTE, LTE-A Cat. 4
  23. Satellite navigation: GPS/GLONASS
  24. LTE bands support: 1800, 2100, 2600, 800 MHz
  25. Processor: Qualcomm Snapdragon 615 MSM8939, 1700 MHz
  26. Number of processor cores: 8
  27. Built-in memory: 32 GB
  28. RAM capacity: 3 GB
  29. Video processor: Adreno 405
  30. Memory card slot: yes
  31. Control: voice dialing, voice control
  32. Sensors: light, proximity, gyroscope, compass
  33. Airplane mode: yes

»

Firmware for Lenovo Vibe Shot

Official Android 5.0 firmware [stock ROM file] -
Lenovo custom firmware -

Firmware for Lenovo Vibe Shot can be done in several ways. If the firmware file has not yet been uploaded here, then create a topic on the forum, in the section, specialists will help you and add the firmware. Don’t forget to write a 4-10 line review about your smartphone in the subject line, this is important. The official Lenovo website, unfortunately, will not help solve this problem, but we will solve it for free. This Lenovo model has a Qualcomm Snapdragon 615 MSM8939, 1700 MHz on board, so there are the following flashing methods:

  1. Recovery - flashing directly on the device
  2. A special utility from the manufacturer, or
We recommend the first method.

What custom firmware are there?

  1. CM - CyanogenMod
  2. LineageOS
  3. Paranoid Android
  4. OmniROM
  5. Temasek's
  1. AICP (Android Ice Cold Project)
  2. RR (Resurrection Remix)
  3. MK(MoKee)
  4. FlymeOS
  5. Bliss
  6. crDroid
  7. Illusion ROMS
  8. Pacman ROM

Problems and shortcomings of a Lenovo smartphone and how to fix them?

  • If Vibe Shot does not turn on, for example, you see a white screen, hangs on the splash screen, or the notification indicator only blinks (possibly after charging).
  • If stuck during update / stuck when turned on (needs flashing, 100%)
  • Doesn't charge (usually hardware problems)
  • Does not see the SIM card (SIM card)
  • The camera does not work (mostly hardware problems)
  • The sensor does not work (depends on the situation)
For all these problems, contact (you just need to create a topic), specialists will help for free.

Hard Reset for Lenovo Vibe Shot

Instructions on how to do a Hard Reset on Lenovo Vibe Shot (factory reset). We recommend that you familiarize yourself with the visual guide called on Android. .


Reset codes (open the dialer and enter them).

  1. *2767*3855#
  2. *#*#7780#*#*
  3. *#*#7378423#*#*

Hard Reset via Recovery

  1. Turn off your device -> go to Recovery
  2. "wipe data/factory reset"
  3. “yes - delete all user data” -> “Reboot System”

How to log into Recovery?

  1. hold down Vol(-) [volume down], or Vol(+) [volume up] and the Power button
  2. A menu with the Android logo will appear. That's it, you are in Recovery!

Reset Lenovo Vibe Shot You can do it in a very simple way:

  1. Settings->Backup and reset
  2. Reset settings (at the very bottom)

How to reset a pattern key

How to reset the pattern key if you forgot it and now you can’t unlock your Lenovo smartphone. On the Vibe Shot model, the key or PIN can be removed in several ways. You can also remove the lock by resetting the settings; the lock code will be deleted and disabled.

  1. Reset graph. blocking -
  2. Password reset -

We must warn you that if you decide to update Android and reflash L V S, then you are acting on your own. In short, I’m withdrawing my review about this device and I still haven’t received the normal firmware from. Before the European firmware there was version Z907, after the firmware there was version Z9040. Communities Chinese Smartphones gadgets and accessories Blog L V S 9040. Watch, Firmware L V Video! . Here you can download free firmware for the L V S phone running on A 5. Firmware for the phone is quite simple, so L V S Z90A40. L V S Z90A40 Unlock account. L V 9040 factory firmware. Firmware for cell phones Firmware L Firmware L V S. Firmware L V S Z907 p. A little background on why the L Z907 is also the Z9040 of the Russian version. Firmware L V S Z9040 7 Android

Android below installed from the memory card for security reasons is not possible. L Z90A40 V S, A 6, 16 MPX, 32 GB M, 3GB RAM. Firmware L V S Z907 with the transformation of the Chinese into. There is no pure android and is not expected, a factory one. Firmware L V S Z9040 7 Android L V S Z9040 B. Selling due to uselessness. When making a request to L, asking for clarification on how. Wireless charging for L V S 32GB)

 

It might be useful to read: